Description:
Expand your 2×72 Belt Grinder Accessories with these rock-solid tooling arms! They work very well with our D-shaped flat platten backing plates & also our tool rests. The finish is industrial bare aluminum, we do not paint, polish or anodize these. You can polish them up with a buffing pad if you want a shiny look.
Dimensions
- Solid Aircraft Aluminum
- Size: 1.5″ x 1.5″
- Length: 20″
- Threaded Holes: It has 2 threaded holes which are ideal for mounting our, D-shape backing plate.
- The front threaded hole is 1.34″ from its center to the front edge of the bar, it’s tapped 1/2-13 straight through the bar
- The second threaded hole is 1.8125″ center to center behind the front threaded hole, it’s tapped 3/8-16 at least 1″ in, enough for the capture bolt
- Unthreaded holes: It has 2 Unthreaded on the side perpendicular to the threaded holes. which is ideal for attaching a tool rest or other accessories.
- The front unthreaded hole is .66″ from its center to the front edge of the bar, it’s drilled 3/8″ straight through the bar
- The second unthreaded hole is 1.7″ center to center behind the front hole, it’s drilled 3/8″ straight through the bar
ID#3896
Reviews
There are no reviews yet.